Lb-white AW100 Bedienungsanleitung PDF herunterladen (Seite 10)

To CConnect tthe SSeries TTap PPlug TThermostat KKit:

a. Connect the power cord of the heater to the

female side of the plug on the end of the

thermostat cord.

b. Plug the male side of the series tap plug on the

thermostat cord into a three-wire (grounded)

electrical outlet within the building.

To CConnect tthe DDirect WWired TThermostat KKit tto tthe

Control BBox oon tthe HHeater:

a. The installation and wiring of a thermostat must

be done by an electrician or someone properly

qualified.

b. The thermostat may use 18 gauge, 2 wire cord to

handle the low voltage being supplied to the

thermostat from the transformer.

c. Follow all instructions provided with the

thermostat kit.

d. The heater must be tested for proper operation

after the thermostat has been connected.

WARNING

Electrical SShock HHazard

■ Disconnect the electrical supply before connecting the

thermostat to the heater.

■ Failure to follow this warning can result in electrical

shock, leading to personal injury or death.

THERMOSTAT INSTALLATION

MANUAL SHUT-OFF VALVE, HOSE

AND REGULATOR ASSEMBLY

REGULATOR

NIPPLE

VALVE, MANUAL

SHUT-OFF

GAS HOSE

ADAPTER

SEDIMENT TRAP

TO CONTROL

VALVE INLET

REGULATOR VENT

GAS FLOW

1. Always use approved pipe thread compound suitable

for use with L.P. gas or natural gas on the threaded

connections.

2. Assemble the components together according to the

figure. This view is to show general assembly of the

components only. The regulator must always be

mounted so its vent, regardless of location on the

regulator, is always pointed downward.

3. Tighten all connections securely.

FIG. 5

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Lb-white AW100 Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Heizkörper Lb-white AW100